BTPBN - NORLAND OPTICAL ADHESIVE 81
- MSDS: BTPBN
- Manufacturer: NORLAND PRODUCTS INC
- Product Name: NORLAND OPTICAL ADHESIVE 81
- National Stock Number: 8040-00F035853
Product Identification
Product ID:NORLAND OPTICAL ADHESIVE 81
MSDS Date:10/04/1991
FSC:8040
NIIN:00F035853
MSDS Number: BTPBN
Responsible Party
NORTH BRUNSWICK, NJ 08902-5000
US
Emergency Phone: 908-545-7828
Info Phone: 908-545-7828
Cage: 55636
Contractor
Cage: 55636
Ingredients
MERCAPTO-ESTER
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): >50 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: DERMATITIS, SENSITIZATION,
IRRITATION. EYES: IRRITATION. INHALATION: RESPIRATORY TRACT
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, SHORTNESS OF BREATH, FAINTING,
HEADACHES, NAUSEA
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINUTES. SKIN: WASH AREA
W/SOAP & WATER. INGESTION: DILUTE W/MILK/WATER IF ALERT.
INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:OC
Flash Point:350F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Accidental Release
Spill Release Procedures:CONTAIN MATERIAL W/ABSORBENTS. PLACE IN
CONTAINER FOR DISPOSAL. CLEAN UP W/SOAP & WATER & FLUSH AREA
W/WATER.
Handling
Handling and Storage Precautions:DON'T REUSE CONTAINER. FOR INDUSTRIAL
USE ONLY. STORE AT 5-25C. KEEP AWAY FROM SUNLIGHT.
Exposure Controls
Respiratory Protection:AIR PURIFYING RESPIRATOR EQUIPPED W/ORGANIC
VAPOR CARTRIDGES
Ventilation:LOCAL & MECHANICAL EXHAUST
Protective Gloves:NITRILE, BUTYL RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LEATHER SHOES, COVER ARMS & LEGS
Work Hygienic Practices:REMOVE/LAUNDER/DISCARD CONTAMINATED CLOTHING
BEFORE RESUE. PRACTICE GOOD HOUSEKEEPING.
Supplemental Safety and Health
Chemical Properties
Vapor Pres:<0.1
Vapor Density:>1
Spec Gravity:1.2
Evaporation Rate & Reference:(BU AC =1): <1
Appearance and Odor:CLEAR LIQUID; SULFUROUS ODOR
Percent Volatiles by Volume:<0.1
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SUNLIGHT, UV, TEMP >65C
Hazardous Decomposition Products:CO, HYDROGEN SULFIDE, HYDROGEN CYANIDE
Disposal
Waste Disposal Methods:MATERIAL MAY BE CURED SOILD BY UV LIGHT. CURED
MATERIAL MAY BE DISPOSED OF IN LANDFILL. COMPLY W/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.